RocketFish RF-BPRACDC2 User's Guide download pdf (Page 8)

2 Connect the selected tip to the end of the output cable,

making sure that the pins on the tip are aligned with the

holes in the cable. The ridge on the inside of the tip

should align with the groove in the output cable

connector. Also make sure that the tip is pushed all the

way into the output cable's connector.

3 Plug the power tip into your notebook computer.

4 Plug the DC power connector input cable into the power

adapter.

5 Remove the vehicle cigarette lighter connector to reveal

the air connector, by holding the tab at the base of the

connector to slide the cigarette lighter connector off.

6 Insert the adapter's air connector into the in-seat power

socket, which is usually found on the arm of your seat or

under the seat. The adapter's status light will glow when

powered. When the adapter has power, the status light

turns on. Your device is now powered.

FAQ for Rocketfish adapters

What tip should I use for my laptop?

You can determine the correct tip for your laptop by

referencing the Tip Compatibility Guide included with the

adapter or by visiting the Tip Wizard at

www.RocketfishProducts.com. Locate your laptop

manufacturer and model and the correct tip will be listed.

Hold this tab and

slide the auto

connector off.

Auto connector

Air connector

RF-BPRACDC2 09-0392_ENG.fm Page 8 Tuesday, May 19, 2009 3:24 PM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

RocketFish RF-BPRACDC2 User's Guide Page 8