Rocketfish RF-TVMFM01 - User Manual User Manual download pdf (Page 10)

Need help? Call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)

RF-TVMFM01V2 TV Wall Mount

STEP 5 - Option 2: Attaching the hardware and mounting the TV to the arm assembly

for TVs with an irregular or inset back

1 Install spacers (E), washers (D), and screws (C) into the top two holes in the back of the TV.

2 Leave a gap between the spacer and the washer and screw.

3 Mount the TV by fitting the top spacers, screws, and washers over the notches in the top of the arm

assembly plate.

4 Install the bottom spacers (E), screws (C), and washers (D) into the bottom holes. If the hole pattern on your

TV is 75mm x 75mm, do not use washers.

5 Make sure that the bracket is level, then tighten all screws carefully until snug.

You’ll need

HEAVY! You will need

assistance with this step.

Phillips screwdriver

Screws

Washers

D (4)

C (4)

Screws

Spacers

E (4)

Level

Arm assembly (A)

RF-TVMFM01V2_13-0599_MAN_V4_ENG - GIFs.fm Page 10 Friday, June 28, 2013 8:10 AM

1 2 ... 5 6 7 8 9 10 11 12 13

No comments

Rocketfish RF-TVMFM01 - User Manual User Manual Page 10